Original log file · 20111125-2130.txt
------------------------------------------------------------------------
r2130 | helixhorned | 2011-11-25 01:53:07 -0800 (Fri, 25 Nov 2011) | 17 lines
Ability to duplicate an inner loop in a neighboring TROR sector.
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
------------------------------------------------------------------------
r2129 | helixhorned | 2011-11-25 01:52:52 -0800 (Fri, 25 Nov 2011) | 3 lines
"Sloped extended sectors cannot be split", oops. Also fix a glitch that
would break out of the 2D mode loop when splitting a sector would exceed
limits.
------------------------------------------------------------------------
r2128 | helixhorned | 2011-11-25 01:52:37 -0800 (Fri, 25 Nov 2011) | 1 line
Factor out high-level 'add loop to sector' code into own function.
------------------------------------------------------------------------
r2127 | helixhorned | 2011-11-25 01:52:22 -0800 (Fri, 25 Nov 2011) | 1 line
in 'adding new loop to sector': use local 'firstwall' instead of ovh.suckwall
------------------------------------------------------------------------
r2126 | helixhorned | 2011-11-25 01:52:08 -0800 (Fri, 25 Nov 2011) | 7 lines
Three Mapster32 changes (2 wall-drawing related, 1 crash fix)
- Don't crash when sector joining fails under certain circumstances.
- Increase the point lock (Manhattan) distance from 1/16th to 1/8th
of the grid square length, making it easier to snap to vertices not
lying at the grid points with grid lock on
- When drawing walls, don't snap to any of them except the first drawn
------------------------------------------------------------------------
r2125 | helixhorned | 2011-11-25 01:51:53 -0800 (Fri, 25 Nov 2011) | 7 lines
Batch-insertion of many points at once using line drawing and ENTER.
When having drawn N new points (and having one 'free') and pressing
ENTER, the N line segments between the new points are checked one by
one for intersection with every non-grayed-out wall and a wall vertex
is inserted at every intersecting point. This may be viewed as a
prerequisite for a 'cutter' style tool.
------------------------------------------------------------------------
r2124 | helixhorned | 2011-11-25 01:51:36 -0800 (Fri, 25 Nov 2011) | 1 line
Warn user if pressing Ctrl+Shift+ENTER (check all wall pointers) in TROR map.
------------------------------------------------------------------------
r2123 | helixhorned | 2011-11-25 01:51:21 -0800 (Fri, 25 Nov 2011) | 5 lines
Factor out high-level point inserting code into M32_InsertPoint().
This function only handles the actual insertion, also taking care of
constrained TROR walls. Anything around the inserting such as backing up
drawn walls or snapping the x/y position to the grid is handled outside.
------------------------------------------------------------------------
r2122 | helixhorned | 2011-11-25 01:51:06 -0800 (Fri, 25 Nov 2011) | 24 lines
Somewhat largish commit with various keyboard tinkering for Mapster.
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
------------------------------------------------------------------------
r2121 | helixhorned | 2011-11-25 01:50:40 -0800 (Fri, 25 Nov 2011) | 7 lines
- Make old-nextwalls invalid on the following two occasions: ovh_whiteoutgrab
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
------------------------------------------------------------------------
r2120 | helixhorned | 2011-11-25 01:50:21 -0800 (Fri, 25 Nov 2011) | 2 lines
Make it impossible to start drawing walls when having a circle-wall
selected. (There was a corner case where this was possible.)
------------------------------------------------------------------------
r2119 | helixhorned | 2011-11-25 01:50:07 -0800 (Fri, 25 Nov 2011) | 3 lines
Remove after_handleevents_hook and its only user, the keystatus-level clearing
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
------------------------------------------------------------------------
r2118 | helixhorned | 2011-11-25 01:49:40 -0800 (Fri, 25 Nov 2011) | 2 lines
Eliminate potential malloc(0) calls when loading (converting) md2 models
with no skins or no GL comands.
------------------------------------------------------------------------
r2117 | helixhorned | 2011-11-25 01:49:22 -0800 (Fri, 25 Nov 2011) | 2 lines
Fix calling glEnable() without checking for the rendering mode in the tile
selector. This could lead to a crash when OpenGL wasn't initialized before.
------------------------------------------------------------------------
r2116 | helixhorned | 2011-11-17 13:10:18 -0800 (Thu, 17 Nov 2011) | 2 lines
Fix the Makefile on OSX. Their linker has a different syntax for requesting the
memory map.
------------------------------------------------------------------------
Engine
Ability to duplicate an inner loop in a neighboring TROR sector.
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
FixEngine
"Sloped extended sectors cannot be split", oops. Also fix a glitch that
would break out of the 2D mode loop when splitting a sector would exceed
limits.
Engine
Factor out high-level 'add loop to sector' code into own function.
Engine
in 'adding new loop to sector': use local 'firstwall' instead of ovh.suckwall
FixEngine
Three Mapster32 changes (2 wall-drawing related, 1 crash fix)
- Don't crash when sector joining fails under certain circumstances.
- Increase the point lock (Manhattan) distance from 1/16th to 1/8th
of the grid square length, making it easier to snap to vertices not
lying at the grid points with grid lock on
- When drawing walls, don't snap to any of them except the first drawn
Engine
Batch-insertion of many points at once using line drawing and ENTER.
When having drawn N new points (and having one 'free') and pressing
ENTER, the N line segments between the new points are checked one by
one for intersection with every non-grayed-out wall and a wall vertex
is inserted at every intersecting point. This may be viewed as a
prerequisite for a 'cutter' style tool.
Engine
Warn user if pressing Ctrl+Shift+ENTER (check all wall pointers) in TROR map.
Engine
Factor out high-level point inserting code into M32_InsertPoint().
This function only handles the actual insertion, also taking care of
constrained TROR walls. Anything around the inserting such as backing up
drawn walls or snapping the x/y position to the grid is handled outside.
FixEngineCON
Somewhat largish commit with various keyboard tinkering for Mapster.
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
FixEngine
- Make old-nextwalls invalid on the following two occasions: ovh_whiteoutgrab
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
Engine
Make it impossible to start drawing walls when having a circle-wall
selected. (There was a corner case where this was possible.)
Remove after_handleevents_hook and its only user, the keystatus-level clearing
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
Eliminate potential malloc(0) calls when loading (converting) md2 models
with no skins or no GL comands.
FixEngine
Fix calling glEnable() without checking for the rendering mode in the tile
selector. This could lead to a crash when OpenGL wasn't initialized before.
Fix
Already listed in build
2116Fix the Makefile on OSX. Their linker has a different syntax for requesting the
memory map.
